Constitution class

Constitution class

Specifications

	Mk I	Mk II	Mk III
Date Entered Service	2245	Jun 2260	Feb 2270
Number Constructed	13	28	6
Length	290m	290m	295m
Width	127m	127m	127m
Height	73m	73m	73m
Decks	23	23	23
Mass	162,425mt	164,600mt	167,900mt
Cargo Capacity	19,000mt	19,500mt	19,500mt
Computer Type	M-3	M-4	M-4
Transporters (Personnel)	4	4	4
Transporters (Emergency)	5	5	5
Transporters (Cargo)	2	2	2
Crew	203	430	435
Passengers	80	60	235
Evacuation limit	Unk.	Unk.	3,500
Shuttlecraft	10	12	12
Cruising Speed	Warp 6 (OCU)	Warp 6 (OCU)	Warp 6 (OCU)
Emergency Speed	Warp 8 (OCU) for 12 hours	Warp 8 (OCU) for 12 hours	Warp 8 (OCU) for 12 hours
Weapons	6 FL-6 Phase cannons in 3 banks	6 FH-3 Type IV Phasers in 3 banks	6 FH-3 Type IV Phasers in 3 banks
	2 torpedo tubes; 100 Photon torpedoes	2 torpedo tubes; 100 Photon torpedoes	2 torpedo tubes; 100 Photon torpedoes

The Constitution class cruiser first entered service in 2245. The most renowned vessels of their time, Constitution class cruisers performed their duties to perfection for several decades. An integral part of Starfleet's buildup during "The Great Awakening," the class also distinguished itself during the Four Years War.

Background

Originally, the class was intended to be much smaller, similar to the Daedalus and Ranger classes that came before it, but a shift in design philosophies and the result of decades of research showed that a larger design could be feasible. The original construction contract called for thirteen vessels to be built, which would serve as cruisers with complete research facilities, capable of operating on five-year research and exploration missions. The prototype U.S.S. Constitution NCC-1700, commissioned in January 2245, was followed by a new ship each month thereafter; the U.S.S. Enterprise NCC-1701 in February, the U.S.S. Constellation NCC-1017 in March, the U.S.S. Intrepid NCC-1631 in April, the U.S.S. Republic NCC-1371 in May, and the U.S.S. Farragut NCC-1647 in June. These first five vessels spent the next two years undergoing shakedown trials, while the remaining seven vessels of the initial authorization of Stardate 0965 were built and commissioned over the next five years, ending with the U.S.S. Defiant NCC-1764 in November 2250.

When the Four Years War broke out in 2252, four Constitution class vessels saw combat; each distinguished itself in battle on multiple occasions, garnering the nickname "The Queens of Starfleet" for the class. After-action reports continued to show the class to be superior to any other in the fleet, and in November 2254, Starfleet Command ordered the production of more vessels of the class, and funding for the expansion of the class was authorized by the Starfleet Appropriation of Stardate 3220.

Initial Design

Constitution class schematic

A multirole deep-space exploration cruiser, the Constitution class was able to project a Federation presence further than ever before. The class included a number of enhancements not found on other classes of the era. Lavish accommodations allowed for the performance of diplomatic and courier missions, while an abundance of scientific laboratories and personnel made the class a superb exploratory and scientific platform. A more modular design allowed the rapid replacement of components and the varying of payloads at a moment's notice, as well as easy upgrades during a vessel's operational lifetime, as opposed to lengthy overhauls that kept other classes in spacedock.

While the class originally mounted the Tesla-class FL-6 Phase cannons, known colloquially as "Lasers," the Mark II specifications would introduce FH-3 Phaser emplacements, which were later reclassified as Type IV Phasers. Constitution class starships used Duotronic computers, based on designs developed by Dr. Richard Daystrom in 2243, and mounted the most powerful engines available, based on the revolutionary designs of Dr. Lawrence Marvick. The class also mounted two Mark 12 indirect-fire torpedo tubes and Type I Photon torpedoes, which provided a sizable tactical advantage over older Spatial and Photonic torpedoes. These torpedo launchers were also capable of firing long-range probes, enhancing the Constitution class's sensor and exploration capabilities. The Mark II design also introduced newer, more powerful Shields, and crew capacity was expanded from 203 to 435, following the invention of the improved food synthesizer.

Because of these modifications to the original design, construction didn't begin until September 2255, and the first ship, the U.S.S. Bonhomme Richard NCC-1712, wasn't commissioned until January 2257, seven months after the end of the war. Starfleet decided to continue the production of the Constitution class, and expanded the total number to 42 vessels.

In March 2259, the FWF-1 warp drive was brought into the inventory; all Constitution class ships were recalled to be refit as Mark IIIs, and construction on additional ships was authorized by the Starfleet Authorization of Stardate 5930. By October 2264, the refitting was complete, and the Constitution class remained the most advanced starship of its time. In 2266, only twelve of the original thirteen ships were still in existence.

Emergency separation

Constitution class saucer separation

Under extreme circumstances, it was possible to separate the primary hull from the dorsal connector and engineering hull, and to operate both sections independently. If performed as part of an abandon ship situation, the crippled portion of the ship would be evacuated into the other section, and the two sections would be separated by activation of explosive bolts at the joint. The primary hull would then be controlled by the Main Bridge, while the engineering hull would be controlled by the Auxiliary Bridge on Deck 19, aft of the main deflector array. Following separation, the primary hull could operate at up to .96c on the main impulse engines, located at the aft end of the saucer. The separated engineering hull, using the warp drive, could maneuver at up to .98c, as well as at warp speeds. Once separated, the two sections could not be reattached autonomously, and required the use of a major shipyard facility or specially equipped work crews from such a facility.

Internal configuration

Command Systems

Constitution class bridge

The central command area for the ship, the Main Bridge was located on Deck 1, and had sensor equipment mounted under a dome atop the bridge module, which supplemented readings received from the main dish. An Emergency Bridge was also located at the heart of Deck 7, deep within the primary hull, where it was surrounded by the ship's medical facilities and computer core. This facility could be used if the Main Bridge was disabled due to damage or malfunction. On Deck 19 in the secondary hull was a third bridge module, located adjacent to a secondary computer core directly aft of the ship's deflector array. This bridge module was intended for use in the event of saucer separation, at which point the engineering hull would operate independently of the saucer.

The captain's office was located on Deck 7. The office had a private bathroom and a reception area outside of the office. The office was used when the captain was not on the bridge or in his quarters, and was primarily used for formal individual or small meetings. The captain also had a private observation lounge, located on Deck 12, within the dorsal "neck." Senior officers had individual offices away from the bridge, which were scattered throughout the ship, adjacent to their respective departments' facilities: the executive officer's office was located on Deck 8; the science officer's office was located on Deck 2, with the science labs; the chief medical officer's office was located within the sickbay facility on Deck 7; and the chief navigator's office was located near the chart room on Deck 7, which held navigational data in both electronic and hard copies.

Constitution class briefing room

Conference and briefing rooms were likewise scattered throughout the ship, on Decks 4, 5, 7, and 19. The Deck 4 conference room was used primarily by junior officers, passengers, and bridge personnel. The Deck 5 briefing room was often used for crew instruction, meetings, and small hearings. Classes were often held here as refreshers, to impart new information, and for anyone interested in broadening their horizons; courses ranged from formal instruction to informal courses on Three-dimensional chess, literature, and music. The briefing room on Deck 7 was used primarily by bridge personnel and the medical department, as well as a staging area for personnel about to embark via the transporters, also located on that deck, and as a debriefing area for landing parties. The Deck 19 briefing room was primarily used by personnel using the ship's auxiliary craft, given its proximity to the shuttlebay.

Sciences

Constitution class arboretum

The Constitution class had fourteen separate science labs. A number of these labs were located on Decks 2 and 3. These labs were dedicated to chemistry, energy, biology, geology, physics, cosmology, and botany. Deck 18 held the ship's hydroponics laboratory, where fresh fruits and vegetables, along with other plants, could be grown. While it wasn't possible for the hydroponics lab to grow enough food to feed the entire crew, enough could be grown for special occasions, such as flowers for decoration. Also on Deck 18 was a botany lab, with a high bay that extended up into Deck 17. The Science Officer's office was located on Deck 2, adjacent to the laboratories.

Medical

The majority of the Constitution class medical facilities were located at the heart of Deck 7, with the main Sickbay, medical labs, operating/examination rooms, convalescent ward, thereaputic baths, obstetrics, dental unit, and medical supplies storage all arranged in a ring surrounding the ship's Emergency Bridge and computer core, a location that offered the greatest protection to these sensitive areas. Additional medical facilities were located on Deck 16 of the secondary hull, for use in case of emergencies in the engineering sections of that hull, or in case of emergency saucer separation. The primary medical facility was normally staffed by the Chief Medical Officer (CMO), while the secondary facility was staffed by the Assistant CMO.

Security/Tactical

Constitution class forward phaser

Constitution class aft phaser

Two forward-facing torpedo tubes were mounted on Deck 3, and the ship's phaser banks were mounted on Decks 5 and 11, with the Auxiliary Fire Control room adjoining the forward phaser bank on Deck 11. From Auxiliary Fire Control, the ship's weapons could be fired manually, in case the remote firing equipment on the Bridge was damaged or disabled. An aft-facing phaser array was located on Deck 15, above the Shuttle Control Room directly above the Shuttlebay doors at the aft of the ship, co-located with sensor equipment beneath a semi-transparent dome.

Security facilities were located on Deck 7 of the primary hull, near the ship's transporter rooms. Adjacent to the security office was a small arms arsenal, which was normally locked and guarded, either directly by security personnel or via security monitor. Also on Deck 7 was the ship's Brig, which consisted of ten cells, all with forcefield protective doors. A secondary security section, with its own brig and small arms arsenal, was located in the secondary hull on Deck 19.

Engineering

File:constitution class engineering-tos-06.jpg

Constitution class engineering section

The ship's impulse engines were located on Decks 6 and 7, at the aft end of the primary hull, and the engineering section that controlled these engines was located immediately adjacent to them on those decks. Main Engineering was located on Deck 16, with controls for the ship's warp drive located at this facility, with access to Jefferies tubes to the engines to the aft. Also on Deck 6 was a turbolift maintenance shop, which contained equipment for repair and maintenance of the ship's turbolift system, as well as controls for manual override of the system, allowing turbolift cars to be recalled or sent to any location on a priority basis, overriding local lift control, with a secondary turbolift maintenance shop on Deck 16. Emergency batteries were located on Decks 4 and 20.

Life support, fabrication, and wastes recovery/reclamation systems were also located in multiple locations throughout the ship, with redundant systems in the primary and secondary hulls on Decks 4, 8, 9, 15, 21, and 22. Fresh water storage was located on Deck 8 in the primary hull, and Deck 15 in the secondary hull. Cargo holds and raw materials storage were located on Decks 9 and 10 in the primary hull, and on Decks 20 through 23 in the secondary hull; in both cases, these storage areas were adjacent to cargo transporter systems and the shuttlebay. The ship's main computer core was located on Decks 7 and 8, buried deep within the primary hull, with secondary core on Decks 16 and 17 in the secondary hull.

Transporters

File:transporter-tos-06.jpg

Transporter

Four personnel transporters were located on Deck 7. Three emergency transporters, capable of transporting 22 people at a time, were located on Deck 8, with another two on Deck 22 in the secondary hull. One cargo transporter was located on Deck 10, adjacent to the cargo holds in the primary hull, with a second on Deck 23.

Accommodations

Food slot

Single-occupancy quarters for senior officers and VIP staterooms were located on Deck 5. Double-occupancy quarters for junior officers and passengers were located on Decks 4 and 5, and double-occupancy quarters for enlisted personnel and passengers were located on Decks 6 and 7. Additional double-occupancy quarters were located on Decks 17 through 19 in the engineering hull for personnel assigned to medical and engineering in the secondary hull. The ship's laundry was located on Deck 8 in the primary hull, and on Deck 21 in the secondary hull. This facility broke down clothing into its original components, extracted foreign matter, then recreated the item in the needed size and shape; the ship's computer stored crew members' sizes, so clothing was always immediately available.

Mess rooms were located at the center core of Deck 6 and on Deck 7 in the primary hull, and on Decks 17, 18, and 22 in the secondary hull. Food was delivered to food slots throughout the ship via a system of small turbolifts from the ship's galley, located on Deck 8; secondary galleys were located in the engineering hull on Decks 21 and 22, which supplemented the primary hull facilities in addition to serving the secondary hull.

Rec Room

Lounges and other recreational facilities were available for use throughout the ship, on Decks 5, 6, and 8 in the primary hull, and on Decks 9, 13, and 14 in the secondary hull's dorsal "neck." The lounge on Deck 5, while intended for senior officers, was open to any crewmember or visitor. Typically, lounges offered food slots, viewscreens for entertainment channels, and games. The Recreation Center, located on Deck 8, used holographic projections and other complicated scenery to generate convincing recreations of planetary landscapes or other settins, and could also be used to play back holographic recordings, enabling a kind of "holographic mail call" for the crew. The ship's gymnasium facilities were located on Deck 8 in the primary hull, and on Deck 20 in the secondary hull. The gymnasium was a large room, complete with equipment, showers, and lockers. In addition to opportunities for individual workouts, classes were also held to help keep personnel in shape. Deck 20 also was home to an 18-meter pool, which extended into Deck 21, as well as a second holographic Recreation Center. The ship's chapel was located on Deck 7, and was used for the crew's various religious services, weddings, and memorial services.

Auxiliary Spacecraft Systems

Constitution class shuttlebay

Constitution class shuttlebay observation deck

The shuttlebay spanned Decks 16 through 19. On Deck 16, at the aft of the ship, the shuttle control room looked out into space through a large window at the top of the hangar doors. This control room oversaw operation of the bay doors, the shuttle elevator/turntable at the base of the shuttlebay on Deck 19, atmospheric control, and cargo handling in the bay. On Deck 17, observation galleries ran along the sides of the shuttlebay, with windows overlooking the bay as well as looking out into space. The area was often crowded with off-duty personnel when shuttles were in use. The shuttle elevator/turntable located at the center of the shuttlebay could be used to transfer shuttlecraft to the shuttle maintenance area on Deck 20, and the shuttlecraft storage area on Deck 21.

 

Major Refit

Constitution class refit

Specifications

	Mk I	Mk II	Mk III	Mk IV
Date Entered Service	2273	Oct 2277	Feb 2279	Feb 2286
Number Constructed	26	19	10	50
Length	302m	302m	302m	322m
Width	131m	131m	131m	131m
Height	74m	74m	74m	78m
Decks	23	23	23	23
Mass	160,275mt	163,275mt	171,008mt	197,543mt
Cargo Capacity	22,500mt	22,500mt	22,500mt	22,500mt
Computer Type	M-6	M-6	M-6A	M-7A
Transporters (Personnel)	4	4	4	4
Transportes (Emergency)	4	4	4	4
Transporters (Cargo)	2	2	2	2 large, 2 small
Crew	412	416	416	422
Passengers	60	60	60	50
Shuttlecraft	12	12	12	10
Crusing Speed	Warp 8 (OCU)	Warp 8 (OCU)	Warp 8 (OCU)	Warp 12 (OCU)
Emergency Speed	Warp 10 (OCU)	Warp 10 (OCU)	Warp 10 (OCU)	Warp 14 (OCU)
Weapons	6 FH-11 (Type VII) Phasers in 3 banks	6 FH-11 (Type VII) Phasers in 3 banks	8 FH-11 (Type VII) Phasers in 4 banks	8 FH-11 (Type VII) Phasers in 4 banks
	2 torpedo tubes	2 torpedo tubes	3 torpedo tubes	4 torpedo tubes

Constitution class refit schematics

On Stardate 7523.2—7 April 2270—the U.S.S. Enterprise returned to Earth orbit following its last, historic five-year mission, by that point the only one of the original thirteen Constitution class vessels remaining in service. Although the decision had been made three months earlier to decommission and scrap the Enterprise, the ship had come to be seen as a symbol of Starfleet and the Federation. This swell of public opinion drove a motion in the Federation Council that led to a reversal of Starfleet's plans. The Enterprise, however, was still twenty-five years old; her systems were becoming outdated, and it soon became apparent that only a major refit could keep the ship at the forefront of the fleet. What began as a simple refit to the Mark IV specifications quickly evolved into a redesign of the entire vessel.

Engineering

File:constitution class engineering-st-01.jpg

Constitution class refit engineering

At the suggestion of Commander Montgomery Scott, the Enterprise's chief engineer, the ship was outfitted with the new FWG-1 / LN-64 Mod 3 warp engines, which would give the ship 33% more operating power and increase its range. This, however, required a new pylon assembly capable of withstanding the forces exerted by the higher speeds, which in turn led to several design changes in the secondary hull. The secondary hull was enlarged, giving room for larger shuttlebays, larger and more efficiently-arranged engineering compartments, enlarged and improved research facilities, and an enclosed deflector array. The primary hull was likewise expanded, to allow room for new control, life support, and computer systems, and sickbay was massively redesigned.

Constitution class refit impulse engines

The ship's fabrication facility was located on Deck 8 and, using technology similar to that found in food synthesizers, it could manufacture nearly any object programmed into the fabricator matrix, and the adjoining reclamation facility reduced discarded items to their component elements for later use. The primary hull's four emergency landing legs were located on on Decks 6 and 7; following an emergency hull separation, these legs could allow the saucer to land safely on a planetary surface. Due to the concave shape of the ventral side of the primary hull, much of Deck 7 did not attain full height. This area contained the ship's cargo bays, emergency batteries, food synthesizers, life support systems, fresh water tanks, and sanitary waste recovery systems.

Deck 14, the uppermost level of the secondary hull, served as the structural support strongback of the ship, and was the anchoring framework for the connecting dorsal and the warp nacelle pylons. The vertical Matter/Antimatter intermix chamber spanned Decks 6 through 19, while matter/antimatter storage was directly beneath it, on Decks 20 and 21; from this location, antimatter fuel could be quickly ejected in case of failure in the storage pods' containment forcefields. Main Engineering was located on Deck 15, where the intermix chamber's horizontal power transfer conduit went aft to the warp nacelle pylons.

Command Systems

Constitution class refit bridge

The M-4 computer system installed on the Constitution class prior to 2270 was inadequate to the task of handling the new propulsion and deflector systems, so the new M-6 computer system was installed, requiring further modification to the primary hull. While the M-4 occupied the central areas of Decks 7 and 8, the M-6 was housed in a central core shaft eight feet in diameter, which extended from Decks 2 through 11. At the midpoint of Deck 7, surrounding the computer core, was the ship's auxiliary control room, which was also known as the ship's Emergency or Auxiliary Bridge; it could assume all functions of the Main Bridge, should damage or malfunction cause it to become unusable. Designed for use in extreme combat situations, the auxiliary control room was deep within the primary hull, and was the best protected location aboard the ship. Also on Deck 7, near the transporter complex, was the main briefing room.

At the forward end of Deck 18, behind the navigational deflector, was the secondary auxiliary control center. This room, virtually identical to the auxiliary control center on Deck 7, encircled the vertical intermix chamber; it enabled command personnel to control shipboard systems in the event that the primary hull was separated or suffered severe structural or control damage. Just aft of the secondary auxiliary control center was a reserve M-6B engineering control computer. This computer, combined with the engineering computer on Deck 14, were sufficient to operate the secondary hull independently of the saucer and its M-6 computer core.

Security/Tactical

Constitution class refit torpedo launcher

The torpedo launchers were moved from the primary hull to the base of the dorsal connector on the engineering hull, and the newer launchers increased firepower by more than 20%. Though the torpedo launchers were initially intended to be fully automated, shortening the launch time by twenty percent, an unforeseen overheating problem plagued the auto-arming system, aborting seven percent of all attempted launches. Decks 12 and 13 were modified to house a two-level complex of photon torpedo storage and launching machinery. A backup firing computer was installed on Deck 12, just aft of the turbolift shaft. The torpedo launch tubes joined at the aft, allowing a single loading mechanism to service both tubes. Each tube was capable of holding four torpedoes at the ready for rapid firing. The phaser arrays were replaced by the new FH-11 / RIM-12C emplacements, which would later be redesignated the Type V. These phasers drew power directly from the warp engines, dramatically increasing their capabilities over the older Type IV. In addition to the main phasers on the primary hull, addtional phasers were located on Deck 15, adjacent to the shuttlebay control room, and on Deck 21, on the ventral side of the hull.

The auxiliary fire control center was located at the center of Deck 7, surrounding the computer core and directly beneath the auxiliary control room; all shipboard weapon systems could be controlled manually from this location. Also on this deck, adjoining the briefing room, was the ship's armory, as well as the main brig.

Sciences/Medical

Sickbay

The improved sickbay complex formed a half-ring near the aft center of Deck 7. The latest advances in Federation medical technology could be found in the facility. A closed-circuit mini-transporter system, installed at various locations throughout the medical section, allowed tissue samples and cultures to be sent instantaneously to or from any lab aboard the ship. The ship's science labs were also located on Deck 7.

File:constitution class arboretum-st-01.jpg

Constitution class arboretum

Twelve panoramic viewports line the outer walls of the ship's arboretum, located on Decks 20 and 21. This area, along with an adjoining botany laboratory, featured a wide variety of plant life, which made it a favorite of off-duty personnel. Bench seating allowed restful viewing of the garden and the viewports. A freshwater stream and pond was stocked with several species of tropical fish.

Accommodations

File:constitution class rec deck-st-01.jpg

Constitution class refit rec deck

Deck 2 was converted from science laboratories to a VIP/Officers' lounge, as well as the officers' mess, which dominated the deck. The lounge area also included a bar, outfitted with updated food slots that were installed throughout the ship, and a privacy area.

Crew quarters and recreational facilities were eliminated from the secondary hull, allowing space for the expanded cargo deck, shuttlebay, and engineering facilities. Double-occupancy VIP staterooms were located on Deck 4, as well as a conference room and junior officers' quarters, which were now single-occupancy rooms with individual bathrooms. Deck 5 housed the ship's senior officers' quarters, as well as additional VIP staterooms; senior officers' quarters were nearly identical to the VIP staterooms, except they were single-occupancy rooms. The majority of Deck 6 was occupied by crew quarters, which were single-occupancy rooms, with two rooms sharing a common bathroom. At the center of the deck was the crew mess, and the upper level of the rec deck was located at the aft end of the deck, to starboard of the impulse engines. Adjoining this was the crew lounge, which was similar to the officers' lounge on Deck 2. The main level of the rec deck was located on Deck 7; this room provided off-duty personnel with electronic games and library facilities, while bowling and racquetball facilities adjoined the reck deck on its starboard side. Additionally, the ship's chapel and gymnasium were located on Deck 7, and the ship's laundry was on Deck 8.

A spacious mess hall was connected to the ship's arboretum on Deck 21, and it was in turn connected to a galley where food could be prepared without the use of food processor technology. At the aft end of Decks 20 and 21 was the ship's swimming pool and sun deck. At its deepest point, the pool was twelve feet (3.66 meters), and three feet (0.91 meter) at its shallowest point. Mounted onto the walls surrounding the pool and sundeck were a series of wraparound viewscreens, which could be programmed to display a variety of beach and island scenes, creating a convincing illusion of a planetary landscape.

Corridor Redesign

Corridor

The Constitution class refit introduced a new corridor design, which provided more than simple access from room to room; several safety and survival features were built into its walls and ceilings. In each corridor segment, there was an emergency survival compartment behind the second panel from the ceiling, which could provide life support and communications for one crew member in case of sudden decompression. A zip-seal pressure bag could fold out of the compartment's padding, allowing the crewmember inside to be transported to safety by other personnel in environmental suits. The panel below the survival compartment opened to a survival suit locker. More compact than a full environmental suit, these survival suits could be donned quickly, and provided atmosphere and heat for two hours. Each locker contained two suits. An emergency equipment locker was accessible via the panel closest to the ceiling; this locker contained additional life support units for survival suits, cutting torches, emergency beacons, communications equipment, tether lines, and other emergency gear. The corridors on each deck deck were color-coded for easy location identification: Deck 4 was brown, Deck 5 was red; Deck 6 was silver; Deck 7 was white; Deck 8 was light blue, Deck 9 was yellow; and all secondary hull corridors were silver.

Auxiliary Spacecraft Systems

File:docking port-st-01.jpg

Docking port

Starfleet's standardized docking ports, used by travel pods and the new Type SW-7 Shuttlecraft, were also installed on Decks 8, 13, and 17, as well as the aft of the new bridge module. Deck 8 was often referred to as the "docking level," as it housed the primary hull's two main docking port complexes, which were normally concealed behind sliding doors that remained flush with the rest of the outer hull when closed. Each docking port contained storage bays with EVA gear and hull repair materials.

File:constitution class-interior-st-01.jpg

Constitution class refit interior

At the aft of the ship on Deck 15, the shuttlebay control room was located directly above the shuttlebay doors. Five large windows looked out into space, with three additional windows allowing a view above the ship, as well as a row of floor-level windows allowing an unobstructed view of the shuttlebay below, which spanned Decks 16 and 17. This facility controlled the shuttlebay doors, landing tractor beams, and atmosphere-maintaining forcefield. Alcoves on either side of the shuttlebay provided storage for up to six standard work bees; additional space was available for the stowage of auxiliary craft not assigned to the ship. A landing tractor beam was mounted to the bulkhead between the observation galleries on Deck 16, and an auto-landing system was built into the center of the bay floor.

File:constitution class shuttlebay-st-01.jpg

Constitution class refit shuttlebay

The shuttlecraft hangar level was on Deck 18, below the shuttlebay. The hangar had sufficient room for the storage of four shuttlecraft at any given time. This deck also housed the ship's lifeboat facilities. These one-person craft, which escaped the ship via blow-away panels in the side of the secondary hull, could be used in case of an emergency that required evacuation of the ship. If the primary hull separated, any personnel in lifeboats could be beamed aboard the saucer, or the lifeboats could dock at the docking ports on Deck 8.

Further Redesign

Over the years, the Constitution class would see further modification. The Mark II refit specifications, introduced in October 2277, replaced the impulse drive with a newer model, providing a 7% increase in operating power. The Mark III, introduced in February 2279, brought in a yet newer impulse drive model, providing a 15% increase in operating power over the Mark I, and a 6% increase over the Mark II; it also brought in an additional bank of aft-facing phasers, and an aft-facing torpedo launcher, as well as an upgrade to the M-6A computer system. The Mark IV, introduced in February 2286, mounted a new warp drive system, which incorporated numerous advances gleaned from the failed transwarp drive experiments of the early 2280s, allowing for even faster speeds than ever. A fourth torpedo launcher was installed, also facing aft. Finally, the computer system was upgraded to the M-7A computer in order to better manage these new systems. The class was ultimately retired from service, beginning in 2293.

Constitution class vessels

Registry	Ship	Commissioned
1732	Achernar	Unk.
1818	Acrux	Unk.
1827	Adhara	Unk.
1816	Agena	Unk.
1790	Ahzdar	Unk.
1796	Alam'ak	Unk.
1812	Aldebaran	Unk.
1781	Alferaz	Unk.
1741	Alfr	Unk.
1828	Alioth	Unk.
1829	Alkaid	Unk.
1803	Altair	Unk.
1821	Anak	Unk.
1738	Androcus	Unk.
1752	Annobon	Unk.
1820	Antares	Unk.
1807	Arcturus	Unk.
1723	Ari	Unk.
1831	Arided	Unk.
1739	Astrad	Unk.
1797	Behr'ak	Unk.
1832	Bellatrix	Unk.
1822	Betelgeuse	Unk.
1819	Binar	Unk.
1712	Bonhomme Richard	2257-01
1814	Canopus	Unk.
1809	Capella	Unk.
1833	Castor	Unk.
Unk.	Christopher Pike	Unk.
Unk.	Confederate	2269
1017	Constellation	2245-03
1728	Constellation	2275-11
1700	Constitution	2245-01
1700-A	Constitution	Unk.
1798	Czar'ak	Unk.
1810	Darion	Unk.
1764	Defiant	2250-11
1826	Deneb	Unk.
956	Eagle	2262-05
1771	Ekinus	Unk.
1722	El Dorado	2259-09
1835	El Nath	Unk.
1792	Elohim	Unk.
1895	Endeavour	2251
1701	Enterprise	2245-02
1701	Enterprise (Alternate)	2245-02
1701-A	Enterprise	2286-12
1779	Esabl	Unk.
1789	Eskiis	Unk.
1697	Essex	2259-04
1664	Excalibur	2246-01
1711	Excalibur	2276-08
1718	Excelsior	Unk.
1672	Exeter	2247-03
1706	Exeter	2276-05
1966	Explorer	Unk.
1647	Farragut	2245-06
1729	Farragut	2276-02
1804	Fomalhaut	Unk.
1786	Ghar	Unk.
1749	Ghondr	Unk.
1782	Hajj	Unk.
1793	Heimdal	Unk.
1825	Helios	Unk.
1703	Potemkin	2250-07
1813	Hor	Unk.
1714	Hornet	Unk.
1748	Horok	Unk.
1631	Intrepid	2245-04
1851	Intrepid	2269
1754	Jassan	Unk.
1791	Jenshahn	Unk.
1734	Jupiter	Unk.
1802	K'Hotan	Unk.
1801	K'Ushui	Unk.
1769	Kars	Unk.
1710	Kongo	2257-09
1767	Kep Salu	Unk.
1766	Kestral	Unk.
1768	Ketoi	Unk.
1726	Krieger	Unk.
1720	Lafayette	Unk.
1709	Lexington	2246-12
1823	Lux	Unk.
1794	Maat	Unk.
1778	Mazda	Unk.
1773	Mengen	Unk.
1715	Merrimac	2258-08
1836	Miaplacidas	Unk.
1788	Mirazh	Unk.
1740	Mondoloy	Unk.
1785	Mongo	Unk.
1713	Monitor	Unk.
1838	Murzim	Unk.
1758	Ndele	Unk.
1772	Oblik	Unk.
1761	Oomaru	Unk.
1755	Paegan	Unk.
1787	Pari	Unk.
1750	Pelione	Unk.
1746	Pilar	Unk.
1839	Polaris	Unk.
1808	Pollux	Unk.
1657	Potemkin	2249-06
1702	Potemkin	2275-04
1756	Procyon	Unk.
1737	Proxima	Unk.
1736	Quindar	Unk.
1775	Qizan	Unk.
1776	Qual'at	Unk.
1707	Ranger	Unk.
1840	Regulus	Unk.
1371	Republic	2245-05
1753	Republic	2277-04
1824	Rigel	Unk.
1735	Rigil Kentaurus	Unk.
1774	Salayna	Unk.
1765	Samaara	Unk.
1724	Saratoga	2259-05
1811	Sardar	Unk.
1795	Shaandra	Unk.
1745	Shahr	Unk.
1744	Sirius	Unk.
1733	Sol	Unk.
1730	Soryu	Unk.
1815	Spica	Unk.
1783	Tajarhi	Unk.
1751	Tali	Unk.
1763	Temir	Unk.
1742	Thelonii	Unk.
1747	Tholus	Unk.
1725	Tori	2260-02
1777	Tulan	Unk.
1799	Tutakai	Unk.
1731	Valiant	2258-10
1806	Vega	Unk.
1817	Vena	Unk.
1721	Wasp	Unk.
1842	Wezen	Unk.
1743	Xanthii	Unk.
1762	Yaan	Unk.
1705	Yamato	2257-03
1704	Yorktown	2247-05
1717	Yorktown	2275-12
1760	Za'Faran	Unk.
1780	Zaahm	Unk.
1759	Zindar	Unk.
1716	Zuiho	Unk.